Curtains. Sunday , August 13th , 2017 - 21:58:51 PM
The basic functions of any window treatment are, regulation of light in the living room, providing privacy, heat, and cold insulation and lastly, adding beauty to the room. Once you decide the framework and functions of the drapery, move on to the fabric and style that can be used which also depend on the type of window. You may choose any of the styles or ideas mentioned below or improvise on them and come up with customized designs of your own.
A great idea for DIY bay window curtain rods is to make them with the help of dowels. To make these functional bay window curtain rods, you will need a long dowel, decorative drawer knobs, a hand-held drill, a handsaw, T nut bolts and spray paint. First measure the width of all the three window casements of the bay window. Now cut the dowel into three pieces, according to the dimension of the window. If your bay window is not the three window casement style, but consists of one wide window, then you need not cut the dowel at all. Drill holes at the ends of the dowel by attaching a drill bit to a hand-held drill. While drilling holes into the dowel, make sure that it is properly centered. Attach T nut bolts on each holes of the dowels and make sure it is flush with the dowel ends. Screw in the decorative drawer knobs on each end of the dowels. If you want to give the curtain rod a more finished look, then spray paint it with a matt or metallic textured paint. Install curtain rods on the brackets of the bay windows.
Place the outer ring on the outer side of the support. For this, you need to extend rod from the both end of the support.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Facboksignin claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.